Rom-News-247.de
The same quantity in the correct proportion
Datum: Dienstag, dem 05. Februar 2019
Thema: Rom Infos
ProtectoXP from Rehm offers 2K encapsulation
In modern electronics manufacturing it remains important to protect sensitive assemblies from external influences - reliably, safely and as well as possible. Yet continuing development and miniaturisation in electronics are creating ever more complex assemblies that call for an even more precise level of protection. With the ProtectoXP, Rehm Thermal Systems offers a lacquering system with the option of 2K encapsulation for a particularly high level of protection.
Corrosion, moisture and vibration are just some of the hazards that can cause damage to an assembly from outside. To protect individual components or indeed the entire assembly, however, these can be coated with a protective lacquer after soldering. Selective, automatic coating of electronic assemblies with a protective lacquer, a process known as "conformal coating", offers numerous possibilities here.
The Protecto lacquering systems from Rehm Thermal Systems, for example, have multifunctional lacquer applicator units that can apply the lacquer by spraying, dispensing or jet, to suit the application - even in narrow gaps between components. For the ProtectoXP there is a wide range of applicators available, through which it is possible to select the right equipment for the corresponding application and thus always to achieve the best possible result. From these applicators up to four can be used simultaneously, for example the 2K system.
In this volumetric dosing system, two different material components - irrespective of whether they are high or low in viscosity - are applied uniformly and without pulsation, and independently of any fluctuations in pressure, temperature or viscosity. A 2K encapsulation of this kind is always used when a particularly high level of protection is required. The volumetric operating principle of the applicators ensures that the correct quantity of material in the correct mixing ratio is delivered every time, irrespective of temperature or fluctuations in pressure.
Further information on the ProtectoXP and the 2K system is available at www.rehm-group.com
As a specialist in the field of thermal system solutions for the electronics and photovoltaics industries, Rehm is a technology and innovation leader in the modern and economical production of electronic modules. As a globally operating manufacturer of reflow soldering systems with convection, condensation or vacuum, drying and coating systems, functional test systems, equipment for the metallisation of solar cells as well as numerous customer-specific special systems, we are represented in all relevant growth markets and, as a partner with more than 25 years of industry experience, we implement innovative manufacturing solutions that set standards.
Rehm Thermal Systems GmbH
Anna-Lena Kast
Leinenstraße 7
89143 Blaubeuren
07344 9606 746
07344 9606 525
www.rehm-group.com
Pressekontakt:
Rehm Thermal Systems
Anna-Lena Kast
Leinenstraße 7
89143 Blaubeuren
an.kast@rehm-group.com
07344 9606 746
www.rehm-group.com
(Weitere interessante Erneuerbare Energien News, Infos & Tipps gibt es hier.)
Zitiert aus der Veröffentlichung des Autors >> PR-Gateway << auf http://www.freie-pressemitteilungen.de. Haftungsausschluss: Freie-PresseMitteilungen.de / dieses News-Portal distanzieren sich von dem Inhalt der News / Pressemitteilung und machen sich den Inhalt nicht zu eigen!
ProtectoXP from Rehm offers 2K encapsulation
In modern electronics manufacturing it remains important to protect sensitive assemblies from external influences - reliably, safely and as well as possible. Yet continuing development and miniaturisation in electronics are creating ever more complex assemblies that call for an even more precise level of protection. With the ProtectoXP, Rehm Thermal Systems offers a lacquering system with the option of 2K encapsulation for a particularly high level of protection.
Corrosion, moisture and vibration are just some of the hazards that can cause damage to an assembly from outside. To protect individual components or indeed the entire assembly, however, these can be coated with a protective lacquer after soldering. Selective, automatic coating of electronic assemblies with a protective lacquer, a process known as "conformal coating", offers numerous possibilities here.
The Protecto lacquering systems from Rehm Thermal Systems, for example, have multifunctional lacquer applicator units that can apply the lacquer by spraying, dispensing or jet, to suit the application - even in narrow gaps between components. For the ProtectoXP there is a wide range of applicators available, through which it is possible to select the right equipment for the corresponding application and thus always to achieve the best possible result. From these applicators up to four can be used simultaneously, for example the 2K system.
In this volumetric dosing system, two different material components - irrespective of whether they are high or low in viscosity - are applied uniformly and without pulsation, and independently of any fluctuations in pressure, temperature or viscosity. A 2K encapsulation of this kind is always used when a particularly high level of protection is required. The volumetric operating principle of the applicators ensures that the correct quantity of material in the correct mixing ratio is delivered every time, irrespective of temperature or fluctuations in pressure.
Further information on the ProtectoXP and the 2K system is available at www.rehm-group.com
As a specialist in the field of thermal system solutions for the electronics and photovoltaics industries, Rehm is a technology and innovation leader in the modern and economical production of electronic modules. As a globally operating manufacturer of reflow soldering systems with convection, condensation or vacuum, drying and coating systems, functional test systems, equipment for the metallisation of solar cells as well as numerous customer-specific special systems, we are represented in all relevant growth markets and, as a partner with more than 25 years of industry experience, we implement innovative manufacturing solutions that set standards.
Rehm Thermal Systems GmbH
Anna-Lena Kast
Leinenstraße 7
89143 Blaubeuren
07344 9606 746
07344 9606 525
www.rehm-group.com
Pressekontakt:
Rehm Thermal Systems
Anna-Lena Kast
Leinenstraße 7
89143 Blaubeuren
an.kast@rehm-group.com
07344 9606 746
www.rehm-group.com
(Weitere interessante Erneuerbare Energien News, Infos & Tipps gibt es hier.)
Zitiert aus der Veröffentlichung des Autors >> PR-Gateway << auf http://www.freie-pressemitteilungen.de. Haftungsausschluss: Freie-PresseMitteilungen.de / dieses News-Portal distanzieren sich von dem Inhalt der News / Pressemitteilung und machen sich den Inhalt nicht zu eigen!
|
|